What Makes Up a Rubber Compound? An Inside Look at Custom Elastomer Formulation

FFKM, or perfluoroelastomers, are a group of elastomers that are used across a wide range of industries.

By Emily HD

• 6 min read

Share this post:

What Makes Up a Rubber Compound? An Inside Look at Custom Elastomer Formulation

Ask most people what a seal is made from, and the answer is simply “rubber”. But in practice, the material a gasket, O-ring, or diaphragm is made from is a formulated compound built from a dozen or more ingredients, and getting that formulation right is what separates a component that lasts for years from one that fails within months.

In the blog below, we cover what a rubber compound is and what goes into creating the perfect elastomer materials for the unique temperature, chemical, and mechanical demands of differing applications. 

What is a rubber compound?

A rubber compound is the engineered mixture of base polymer combined with fillers, plasticisers, protective agents, and curing chemicals, then processed to create a material with defined mechanical, thermal, and chemical properties.

Raw natural or synthetic rubber on its own is soft and structurally weak, and it degrades quickly when exposed to heat, oxygen, or ultraviolet light. As such, combining it with additional ingredients helps to give much more resilient properties to create materials that can withstand tough working conditions.

The formulation of a compound, not just the type of polymer alone, determines whether a finished custom rubber seal, gasket, or rubber moulding component performs reliably in its intended environment.

The core ingredients in a rubber formulation

Every rubber compound is created from different types of ingredients, with each providing a distinct function to the final material. These are as follows:

Base polymers (elastomers)

The base polymer sets the fundamental character of the compound, such as its flexibility, temperature range, and resistance to specific chemicals, oils, or fuels. Common choices for this include EPDM, nitrile, neoprene, fluorocarbon (FKM), and silicone.

For the most demanding environments, perfluoroelastomers (FFKM) are often chosen, which combine the sealing force of a rubber with chemical resistance approaching that of PTFE. Selecting the right polymer is the first and most consequential decision in any formulation, since no additive can compensate for the wrong base material.

Fillers and reinforcing agents

Fillers such as carbon black and precipitated silica reinforce the polymer matrix and improve tensile strength, tear resistance, and abrasion resistance.

The type, particle size, and loading level of a filler directly affect the hardness and colour. This is why carbon black, used at higher loadings, produces a stiffer, more abrasion-resistant compound suited to demanding mechanical applications.

Plasticisers and oils

Plasticisers and processing oils improve the flexibility and workability of a compound, particularly at low temperatures. These soften the polymer matrix during mixing and moulding and help the finished part retain elasticity in cold conditions where an unmodified compound would stiffen or crack.

Protective agents

Antioxidants and antiozonants protect the finished compound against degradation caused by oxygen, ozone, heat, and ultraviolet exposure. Without these protective agents, even a well-formulated compound will harden, crack, or lose elasticity well before the end of its intended service life, particularly outdoors or at high temperatures.

Curing systems

Curing agents, typically based on sulphur, peroxide, or metal oxide systems, crosslink the polymer chains during vulcanisation. The choice of curing system affects compression set, heat ageing performance, and the compound’s suitability for high-temperature or chemically aggressive service.

The rubber compounding process

Turning a formulation on paper into a finished component involves two distinct stages: mixing and vulcanisation:

Mixing

During mixing, the base polymer is combined with fillers, plasticisers, and protective agents in an internal mixer or on a mill. Achieving even dispersion of every ingredient throughout the polymer matrix is critical, since poorly mixed compounds can show inconsistent properties, weak spots, or surface defects once moulded.

Vulcanisation

Vulcanisation applies heat and pressure, together with the curing agents introduced during mixing, to crosslink the polymer chains into a three-dimensional network. This is the step that transforms a soft, mouldable compound into a durable, elastic material capable of returning to its original shape after repeated deformation.

Natural vs synthetic rubber

Natural rubber, derived from latex, offers excellent elasticity, tensile strength, and resilience, which makes it well suited to applications involving repeated flexing or dynamic loading.

Synthetic elastomers, by contrast, are engineered to deliver specific resistances that natural rubber cannot provide on its own, including resistance to oils, fuels, extreme temperatures, and aggressive chemicals. 

Most sealing challenges call for synthetic or perfluoroelastomer compounds for this reason. The choice between natural and synthetic polymers, or a blend of the two, depends on the application’s performance requirements rather than on cost or convention alone.

Common types of rubber compounds and their properties

The table below covers some of the most widely used rubber compounds, their key performance characteristics, and typical industrial applications.

Compound Key properties Common applications
EPDM Excellent weathering, ozone, and UV resistance, with good heat resistance. Weatherstripping, outdoor seals, roofing membranes.
Nitrile (NBR) Strong resistance to oils, fuels, and hydrocarbons, with good abrasion resistance. Fuel seals, hydraulic components, oil seals.
Neoprene (CR) Balanced resistance to oil, weathering, and moderate chemicals, with flame resistance. Gaskets, hoses, marine components.
FKM (Fluorocarbon) High resistance to heat, fuels, and a wide range of chemicals. Aerospace and chemical processing seals.
FFKM (Perfluoroelastomer) Extreme chemical and temperature resistance, approaching that of PTFE. Semiconductor, aerospace, and nuclear applications.

How compounding affects final performance

Every ingredient decision has a measurable effect on how a finished part performs.

Carbon black increases tensile strength for applications such as tyres and heavy-duty seals, while plasticisers improve flexibility at cold temperatures for seals and hoses in outdoor environments.

The curing system affects compression set under sustained load, and the polymer base sets the ceiling on chemical and thermal resistance that no other ingredient can raise, which is why custom compounding allows a compound to be tuned precisely to an application’s demands.

Industrial applications of rubber compounds

Custom rubber compounds are specified across a range of demanding industries, including motorsport seals, aerospace seals, seals for the oil and gas sector, chemical-resistant rubber, and many more that require specified properties from components that will reliably perform.

At TRP Polymer Solutions, we work across each of these sectors, including Formula 1 teams, chemical processors, and nuclear operators. A recurring theme is the standard compound that has already failed in service under conditions it was never designed to withstand.

Talk to TRP about your next formulation

A very common formulation problem is that a standard compound performs well enough in testing, then degrades, swells, or loses its seal once it meets the real conditions of the application. When that happens, the fix is rarely a different off-the-shelf grade, but a formulation built around the specific failure mode. This is exactly where our engineers can directly help you.

At TRP, we work through that process directly with our customers, from identifying why a current material is falling short, through adjusting the polymer base, filler, and curing system, to prototyping and validating the revised compound ahead of volume production.

Whether you’re specifying a rubber component for a new design or troubleshooting a seal that keeps failing in service, our team can develop a compound built specifically for your application. Contact us today to discuss your requirements with one of our experienced engineers and get your custom formulation moving.

Tailored sealing solutions for tough applications

Contact our Engineers

Get in touch with our friendly team for more information.

Contact Us

FFKM Brochure

Read our FFKM brochure in further detail to understand how TRP delivers outstanding sealing solutions for the most severe of chemical and high-temperature applications.

Read More

TRP Brochure

Read more about how TRP produces high-performance elastomeric seals and custom rubber mouldings, using a wide range of polymers, all of which are carefully selected for their unique characteristics.

Read More
Link copied to clipboard